LA Audio EQX20 - Manual (Page 11)

Page 11
Sets the amount of cut or boost for the HF (High Frequency) section.
FREQUENCY control
Adjusts the cut or boost centre frequency for the HF section. Control range
is 500Hz, CCW to 20kHz, CW.
Q control
Varies the 'Q' of the cut or boost region for the HF section.
CLIP led
The CLIP led monitors the last stage of the EQ section and indicates signal
levels approaching clipping. The led lights at 3dB before clipping so
momentary peaks are monitored but are not necessarily audible.
Excessive amounts of boost will cause the EQX20 to clip. Remember that
overlapping boost from two sections can also accumulate and cause
overload.