Lexmark JETPRINTER Z65P - Manual (Page 18)

15
Setup Troubleshooting
Use this section to solve problems you may have while setting up your
printer.
The Search Results: No Printer Attached screen
appeared.
Note: Your screen may appear slightly different from the one
shown depending on your operating system.
1
Use the Troubleshooting checklist on page 13 to try and solve the
problem.
2
Click Continue or Next.
3 If the screen reappears, make sure your USB cable is securely
attached on both sides and is not damaged. If necessary, replace it
with a good quality USB cable, such as Lexmark P/N 12A2405. To
continue software installation, follow the steps on page 9.
The power light did not come on.
1 Check the power supply connections.