Set the time on the digital clock face – Lathem 4000 User Manual
Page 10
Advertising
2000 – 4000 Series Time Recorder User’s Guide
Page 8
Set the Time on the Digital Clock Face
Figure 6
1. Make a sample registration on paper.
2. Use the Hour and Minute buttons to set the display to the time
shown on the sample registration.
3. To synchronize the display with the type wheels, listen for the
type wheels to click. At the click, press the minute button to
advance to the next minute. Seconds are now synchronized.
Always set the display to regular minutes. Refer to Figure 3,
“dial of decimal equivalent” if wheels print in hundredths or
tenths.
Advertising