Lathem 4000 - Manual (Page 6)

2000 – 4000 Series Time Recorder User’s Guide
Page 4
If your model prints Tenths, (models with the 4
th digit of 2 or 5), go to
the section “Setting Decimal Wheel with Tenths”.
If your model prints Hundredths or 00-23 hours, refer to the Dial of
Decimal Equivalents in Figure 3 (page 5) to determine the correct
setting.
Note: if your machine records in 1-12 hours, the PM hours are
underlined. AM hours are not underlined. Set time to the proper hour
of the day to avoid errors such as setting the day wheel to the next
day at noon rather than midnight.
3. Rotate the Minute Wheels to show the current minute.
4. Set the Hour Wheel to the current hour
5. Rotate the Clock Face Setting Wheel – Figure 5.1 (page 7), to
set the hands to match the time set on the wheels.
6. Rotate the Main Setting Wheel – Figure 2, 2.1 to advance both
the Clock Face and Print Wheels together. Rotate until you
pass the actual time by one minute (each “click” indicates one
minute.)
7. Hold the corner of the Clock Face and release the Release
Latch – Figure 2, 2.2 by pushing it to the left. Slowly let the
Type Section down and press it firmly into the Type Section
Headlock.
8. Make a sample registration and verify the time and date or day
is correct.
9. Replace and lock the case cover.
Note: The month wheel and the date wheel must be reset manually at
the beginning of each month.