Linksys SRW2008 - Manual (Page 52)

42 Chapter 5: Using the Web-based Utility for Configuration
Statistics Tab - RMON History
WebView Switches
Collisions. Displays the number of collisions received on the interface since the device was last refreshed.
Frames of xx Bytes. Number of xx-byte frames received on the interface since the device was last refreshed.
Clear Counters button. This option will reset all of the statistic counts.
Refresh Now button. Use this option to refresh the statistics.
Statistics Tab - RMON History
The RMON History screen contains information about samples of data taken from ports. For example, the samples
may include interface definitions or polling periods.
The RMON History Control screen is divided into RMON History and Log Table.
Source Interface. Displays the interface from which the history samples were taken. The possible field values
are:
• Port. Specifies the port from which the RMON information was taken.
• LAG. Specifies the port from which the RMON information was taken.
Sampling Interval. Indicates (in seconds) the time that samplings are taken from the ports. The field range is 1-
3600. The default is 1800 seconds (equal to 30 minutes).
Max No. of Samples to Keep. Indicates the number of samples to save.
Owner. Displays the RMON station or user that requested the RMON information. The field range is 0-20
characters
The Add to List button adds the configured RMON sampling to the Log Table at the bottom of the screen.
Log Table
Sampling Requested. Displays the number of samples to be saved. The field range is 1-65535. The default value
is 50.
Current Number of Samples. Displays the current number of samples taken.
View History button. This button opens the RMON History screen.
Figure 5-18: Statistics - RMON History