Linksys SRW2008 - Manual (Page 72)

62 Chapter 5: Using the Web-based Utility for Configuration
QoS Tab - Advanced Mode
WebView Switches
Out of Profile DSCP screen
DSCP In. Displays the DSCP In value.
DSCP Out. Displays the current DSCP out value. A new value can be selected from the pull-down menu.
The Policy Settings button opens the Policy Name screen.
Policy Name screen
Policy Name. Defines a new Policy name.
Add to List. The Add to List button will add the policy to the Policy Name table.
Select Policy. Selects an existing Policy by name. The Policy can be comprised of:
• Class Map
• Action
• Policer
New Policy Name. Defines a new Policy name.
Class Map. Selects an existing Class Map by name.
New Class Map. The New Class Map button opens the New Class Map screen.
New Class Map screen
Class Map Name. Defines a new Class Map name
Preferred ACL. Indicates if packets are first matched to an IP based ACL or a MAC based ACL. The possible field
values are:
• IP Based ACLs. Matches packets to IP based ACLs first, then matches packets to MAC based ACLs.
• MAC Based ACLs. Matches packets to MAC based ACLs first, then matches packets to IP based ACLs.
IP ACL. Matches packets to IP based ACLs first, then matches packets to MAC based ACLs.
Figure 5-42: Advanced Mode - Out of Profile DSCP
Figure 5-43: Advanced Mode - Policy Name
Figure 5-44: Advanced Mode - New Class Map