Life Fitness X8 - Manual (Page 14)

Tools Needed:
17mm Socket Wrench, Phillips Screwdriver
Step 1 Packaging
Parts: None
Remove all packaging and place main components to the side of the box. Break box down in each of the four
corners.
NOTE: Use care when removing the foam blocks that support the pedal arms. Follow the unpacking instruction
sheet attached to the foam blocks.
Step 2 Assemble the Stabilizers
Parts: Hardware Bag #1 (4, M10 x 15mm Silver Hex Head Bolts)
Tools: 17mm Socket Wrench
Assemble the stabilizer tubes (feet) (A) to the bottom base brackets (B) of
the product using two M10 x 15mm Silver Hex Head Bolts (1) on each
stabilizer tube. Both stabilizer tubes (feet) are identical.
11