Life Fitness X8 User Manual
Page 39
36
W
HEN
A
CTIVITY
Z
ONE
W
AKES
U
P THE
S
TRIDE
C
HANGES
When the activity zone wakes up from sleep mode the stride length adjusts to the last stride position used before sleep
mode was entered. Sleep mode is a setting that turns the display backlight off to save power and LCD life. It is preset to
5 minutes. The sleep mode can be turned off in the settings menu if you would like the display backlight to always be
turned on.
A
CTIVITY
Z
ONE
D
ISPLAYS
E5
One of the keys on the activity zone is stuck in the pressed-in position. Check to see if you can dislodge the Leg
Sculptor, Stride Up, or Stride Down key. If the key is dislodged “E5” will disappear.
A
CTIVITY
Z
ONE
D
ISPLAYS
S
ETTINGS AND
W
ON
'
T
W
ORK
You have accessed the settings menu. To exit the settings menu press the Leg Sculptor Key until settings has
been exited.
A
CTIVITY
Z
ONE
D
ISPLAYS
S
TRANGE
I
NFORMATION IN THE
D
IGITAL
D
ISPLAY
You may have accessed the settings menu or diagnostics menu. To exit both menus continue to press the Leg Sculptor
key until the menu is exited.
N
OISE FROM
P
EDALS
Some noise from the pedals is normal. It will vary depending on the weight of the user. Check that the accessible hard-
ware beneath the pedals are tight.
C
AN
'
T
F
EEL THE
P
EDAL
C
USHIONING
The cushioning in the pedals is located beneath the front of the pedal. The pedals are designed to deflect a ½ inch.
Depending on your weight the pedals will flex differently. It may be difficult to feel the deflection during a workout
because of your movement.