Linksys EG24M - Manual (Page 38)

2. To change the IGMP setting, highlight IGMP and press Enter. When the
following screen appears, highlight the desired setting and press Enter.
3. When you finish, press the Esc key until you return to the desired screen.
PORT TRUNKING
Using Port Trunking from the Advanced Management screen, you can associ-
ate ports with trunk groups.
1. From the Advanced Management screen, highlight Port Trunking and press
the Enter key. The following screen will appear.
2. Highlight the trunk group to which you want the ports assigned, then press
Enter. A screen similar to the following (see next page) will appear.
10/100 Managed 24-Port GigaSwitch
69
Linksys EtherFast ® II Series
17. Select Disabled or Enabled and press Enter. Your selection will appear
next to Warm Start Trap.
18. Press the Down Arrow key to move to Link Down Trap and press the
Enter key. The Trap Options screen will appear.
19. Select Disabled or Enabled and press Enter. Your selection will appear
next to Link Down Trap.
20. When you finish, press the Esc key until you return to the desired screen.
OTHER PROTOCOLS
Highlight Other Protocols from the Advanced Management screen and press
the Enter key. The Other Protocol Settings screen will appear, with the
GVRP value highlighted.
1. To change the GVRP setting, press Enter with GVRP highlighted. When
the following screen ( see next page) appears, highlight the desired setting
and press Enter.
68