LevelOne WCS-2060 - Manual (Page 27)

27
System parameters
"Host name" The text displays the title at the top of the main page.
“Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the
camera’s operation being noticed.
"Keep current date and time" Click on this to reserve the current date and time of the Network
Camera. An internal real-time clock maintains the date and time even when the power of the
system is turned off.
"Sync with computer time"
Synchronizes the date and time of the Network Camera with the
local computer. The read-only date and time of the PC is displayed as updated.
“Manual” Adjust the date and time according to what is entered by the Administrator. Notice the
format in the related fields while doing the entry.
“Automatic” Synchronize with the NTP server over the Internet whenever the Network Camera
starts up. It will fail if the assigned time-server cannot be reached.
“NTP server”
Assign the IP address or domain name of the time-server. Leaving the text box
blank connects the Network Camera to the default time-servers.
"Time zone" Adjust the time with that of the time-servers for local settings.
“Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server.
Remember to click on to immediately validate the changes. Otherwise, the correct time will
not be synchronized.