LevelOne WCS-2060 - Manual (Page 48)

48
Appendix
A. Troubleshooting
Status LED
The following table lists the LED patterns in general.
Condition LED color
Loading system after power on Steady red
During booting procedure Steady green, blue and red
Detecting and setting network Steady green and blue. Blink red till IP address is
confirmed
After network is setup (system up) Blink green every second and steady red
During the upgrade firmware process Blink green every second and fast blink red
Enable audio Steady blue. Disable audio will turn off blue LED.
Reset and restore
There is a button in the back side of the Network Camera. It is used to reset the system or restore
the factory default settings.
RESET: Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for all LED blink fast.
3. Free the button.
Restoring the factory defaults will erase any previous settings.
B. URL commands of the Network Camera
For some customers who already have their own web site or web control application, the Network
Camera can be easily integrated through convenient URLs. This section lists the commands in