LevelOne FBR-1402TX - Manual (Page 42)

Operation and Status
Data - Status Screen
Internet
Connection Method This indicates the current connection method, as set in the Setup
Wizard.
Broadband Modem This shows the connection status of the modem.
Internet Connection Current connection status:
• Active
• Idle
• Unknown
• Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
Internet IP Address This IP Address is allocated by the ISP (Internet Service Pro-
vider).
"Connection Details"
Button Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
LAN
IP Address The IP Address of the LevelOne Broadband Router.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Advanced menu.
System
Device Name This displays the current name of the LevelOne Broadband
Router.
Firmware Version The current version of the firmware installed in the LevelOne
Broadband Router.
"System Data"
Button Clicking this button will open a Window which lists all system
details and settings.
Printer (FBR-1403TX Only)
Printer Status This indicates the current status of the printer. Possible values
are:
• Idle
• Printing
• Off-line
• Out of paper
"Abort Current Print
Job" Button Click this button to terminate the current print job. This button
should be used if the current print job is not printing correctly.
39