Chapter 2 installation, Requirements, Procedure – LevelOne FBR-1402TX User Manual

Page 10: Requirements procedure, Installation, Chapter 2

Advertising
background image

7

2

Chapter 2

Installation

This Chapter covers the physical installation of the LevelOne Broadband
Router.

Requirements

•

Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

•

TCP/IP protocol must be installed on all PCs.

•

For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)

•

For shared access to the attached printer, the following clients are supported:

•

Windows 95/98/ME

•

Windows NT 4.0, 2000 or XP

•

Unix (LPD printing)

Procedure

Figure 5: Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the LevelOne Broadband Router.
Ensure the LevelOne Broadband Router and the DSL/Cable modem are powered OFF.

2. Connect LAN Cables

•

Use standard LAN cables to connect PCs to the Switching Hub ports on the LevelOne
Broadband Router. Both 10BaseT and 100BaseT connections can be used simultaneously.

•

If required, you can connect the "LAN1" port to another Hub:

Advertising
This manual is related to the following products: