LevelOne FBR-1416 - Manual (Page 12)

Setup
Configuration Program
The FBR-1416 contains an HTTP server. This enables you to connect to it, and configure it,
using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
• Netscape V4.08 or later
• Netscape 7
• Internet Explorer V5.01 or later
Preparation
Before attempting to configure the FBR-1416, please ensure that:
• Your PC can establish a physical connection to the FBR-1416. The PC and the FBR-1416
must be directly connected (using the Hub ports on the FBR-1416) or on the same LAN
segment.
• The FBR-1416 must be installed and powered ON.
• If the FBR-1416's default IP Address (192.168.0.1) is already used by another device, the
other device must be turned OFF until the FBR-1416 is allocated a new IP Address during
configuration.
Using your Web Browser
To establish a connection from your PC to the FBR-1416:
1. After installing the FBR-1416 in your LAN, start your PC. If your PC is already running,
restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the FBR-1416, as in this
example, which uses the FBR-1416's default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter values as follows:
• User name admin
• Password password
9