LevelOne FBR-1416 - Manual (Page 9)

2
Chapter 2
Installation
This Chapter covers the physical installation of the FBR-1416.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and a DSL connection.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the FBR-1416.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the FBR-1416.
Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard LAN ca-
ble. Any LAN port on the FBR-1416 will automatically function as an "Uplink" port when
required.
3. Connect ADSL Cable
Connect the supplied ADSL cable from to the WAN port on the FBR-1416 (the RJ11 con-
nector) to the ADSL terminator provided by your phone company.
6