Linksys WIP330 - Manual (Page 14)

Wireless-G IP Phone
8 Chapter 3: Installing and Using the Wireless-G IP Phone
Powering on the Wireless-G IP Phone
Powering on the Wireless-G IP Phone
Make sure you have the account information, including necessary IP Phone settings, supplied by your Internet
phone service provider. If you already have an account set up with your Internet phone service provider, then
proceed to step 1. If you do not have an account, then go to the website of your Internet phone service provider
and sign up for service. After you have set up an account, proceed to step 1.
1. Make sure you have the account information, including necessary IP Phone settings, supplied by your
Internet phone service provider.
2. Plug the USB mini-B connector of the included power adapter into the USB mini-B port of the IP Phone. Then
connect the power adapter to a standard electrical outlet.
Figure 3-3: Connect the Power