Linksys WIP330 - Manual (Page 36)

Wireless-G IP Phone
28 Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Network Settings
You have two IP Modes available, DHCP and Fixed IP. In most cases, you should keep the default
setting, DHCP, if your network router or gateway will assign IP addresses to the IP Phone. If you want
to assign a static IP address to the IP Phone, select Fixed IP. To change the IP Mode, select Edit. The
on-screen choices will change depending on which IP Mode is selected. Select Save to return to the
previous menu.
DHCP
If DHCP is selected as the IP Mode, the screen will show these settings, Primary DNS and Secondary
DNS.
Primary DNS. To add or change the Primary DNS address, select Edit. Enter the new DNS IP
address in the new window. Select Save to save the new setting, or select Clear to delete a number
on-screen.
Secondary DNS. To add or change the Secondary DNS address, select Edit. Enter the new DNS IP
address in the new window. Select Save to save the new setting, or select Clear to delete a number
on-screen.
Figure 4-15: Select
Network Settings
Figure 4-16: Network
Settings - DHCP
Figure 4-17: Enter DNS
IP Address
ip address: the address
used to identify a
computer or device on a
network.