Lava Computer 2SP-PCI User Manual

Page 3

Advertising
background image

5. When Windows starts, it will find a 2SP-PCI Controller and will ask

you for a driver for this device. When prompted, insert the
installation diskette into your floppy drive. After copying the
necessary files from the diskette, Windows may restart your PC in
order to complete the installation of the 2SP-PCI card. Any Plug and
Play devices attached to the 2SP-PCI will now also be detected and
installed. Windows XP may display a message to the effect that the
drivers are not digitally signed. This warning can be ignored.

6. To view how Windows has installed the 2SP-PCI, open Windows'

Device Manager. Please note that the 2SP-PCI will appear in Device
Manager under two separate entries. The two serial ports will appear
both under the Multifunction Adapters tree and under the Ports
tree, while the Parallel port will appear under Ports only (see
example below). Please use the appropriate listings if you wish to
customize any of the 2SP-PCI card’s settings. Please note that
changes to default settings may be required by users connecting
the 2SP-PCI card to a non-printer peripheral (see reverse). Users
connecting a printer should use default settings.

Advertising