Lenovo ThinkPad X41 Tablet MT 1867 - Manual (Page 60)

Symptom or error FRU or action, in sequence
0182
Bad
CRC2. Enter BIOS Setup
and load Setup
defaults.—Checksum of the
CRS2 setting in the EEPROM
is not correct.
1. Run BIOS Setup Utility.
Press F9, and Enter to
load the default setting.
Then save current setting
by pressing F10.
2. System board.
0185
Bad
startup sequence settings.
Enter BIOS Setup and load
Setup defaults.
1. Run BIOS Setup Utility.
Press F9, and Enter to
load the default setting.
Then save current setting
by pressing F10.
0187
EAIA
data access
error—EEPROM access (read
or write) is failed.
System board.
0188
Invalid
RFID Serialization
Information Area or Bad
CRC2—EEPROM checksum is
not correct (block #0,1).
EEPROM CRC2 is not correct
(block #6).
System board.
Replace planar. Box serial
number needs to be reinstalled.
0189
Invalid
RFID configuration
information area—EEPROM
checksum is not correct (block
#4,5).
System board.
Replace planar. UUID needs to
be reinstalled.
0190
Critical
low-battery error
1. Charge the battery pack.
2. Battery pack.
0191
System
Security—Invalid
Remote Change requested.
1. Run BIOS Setup Utility,
and then save current
setting by pressing F10.
2. System board.
0192
System
Security—IBM
Embedded Security hardware
tamper detected.
System board.
(continued)
Symptom-to-FRU index
56 MT1866/1867/1869