Loewe 3781 ZW - Manual (Page 10)

10
Daily handling
Switching on/off
Your TV set is equipped with an eco-standby
power supply unit. The power consumption drops
to low power in standby mode. If you want to
save even more energy, switch the set off with
the On/Off switch. However, please note that
EPG data are then lost and timer recordings
programmed on the TV set will not be carried
out.
If the TV is switched on, you can
switch it off with the blue On/Off
button on the remote control.
The red standby LED on the set
lights up. If the green (blue) LED
also lights, a timer recording is
in progress, EPG data is being
acquired or radio mode without
screen display is active.
From standby it is best to switch
back on with the blue On/Off
button or with a numeric key
(channel 0-9). The green (blue)
operating LED then lights up.
When you switch on the TV with
OK, you see the channel table
and can choose a channel.
Switch on in the radio mode.
None of the indicators lights up
when you switch off the TV set
with the On/Off button on the
set.
Switch on the TV set with the On/
Off button on the set when it is
switched off.
Changing channels
Channels up/down (only favorite
stations if these are shown in the
station table).
With the numeric keys on the remote control
The set has a dynamic memory with 220/with DVB
1470 memory slots. If up to 9 channels are stored,
you only need to enter one number, up to 99 two
numbers, up to 999 three numbers and above 999
four numbers (please look in the channel table to
find out how many channels have been stored).
1-digit channels
Keep the button 0 – 9 pressed for
one second, the channel then
changes immediately.
or press the button 0 – 9 briefly,
the channel then changes after 2
seconds (immediately when up to 9
channels are stored).
2-digit channels
Keep the second numeric key
pressed for one second, the chan-
nel then changes immediately.
or press both numeric keys briefly,
the channel then changes after 2
seconds (immediately when up to
99 channels are stored).
3-digit channels
Keep the third numeric key pressed
for one second, the channel then
changes immediately.
or press the three numeric keys
briefly, the channel then changes
after 2 seconds (immediately when
up to 999 channels are stored).
4-digit channels
Press the four numeric keys
briefly, the channel then changes
immediately.
Depending on how many channels have been
stored, you can place one or more zeros in front
of the number and select for example channel 7
= 07 or 007 or 0007.
About the channel table
Launch the channel table with
OK
mark the channel
(the marked channel is shown
in the PIP picture
✳ )
or
Mark with numeric keys
Launch the marked channel
Sort alphabetically/numerically
(blue button)
Display favourite channels only
(yellow button)
Launch Audio/Video programs
– AV selection
for playing AV equipment (see
also page 19).
Select AV socket or VIDEO for
VCR transmitter.
1
7
2 7
2 7
1 2 7 8
OK
0
OK
OK
0 9
...
long
short long
short short long
all short
Channel overview: TV Alphabetical
ARD
BR-ALPHA
BR3
CNN INT.
DSF
EUROSPRT
HOT
HR
KIKA
MDR 3
N–TV
N24
N3
M
i
E
Select and
press OK to proceed
Menu
Info
End Change sorting
Change programs
Favourite programs
O K
✳ABCDEFGHIJKLMNOPQRSTUVWXYZ
VIDEO AV1 AV2 AV3 AVS AV Selection
Channel overview: TV Numerical
AVS
AV3
AV2
AV1
0 VIDEO
1 ARD
2 ZDF
3 SAT.1
4 RTL
5 VOX
6 S–RTL
7 N–TV
8 DSF
9 TM3
10 PRO7
11 RTL 2
12 WDR 3
13 BR 3
14 HR
15 MDR 3
M
i
0 9
E
Select and
press OK to proceed
Menu
Info
End Change sorting
Change programs
Favourite programs
O K
... Select program: