Loewe 3781 ZW - Manual (Page 19)

19
Operating additional equipment
Launch the AV channel via the AV selection
Launch AV selection list
Select AV socket or VIDEO for
VCR transmitter.
Now you will see the playback from the con-
nected AV unit.
Launch the AV channel via the channel
overview
Launch the channel table
In the numerical sorting you will always find the
AV sockets at the top of the list without channel
numbers.
Mark the AV socket
Now you will see the playback from the con-
nected AV unit.
0
OK
Video playback
In order to see the VCR picture on your TV and
hear its sound you have several possibilities:
1. You can use the Euro-AV sockets on the TV
set and on the VCR. This is the best option of
all – good picture and sound quality.
If you are playing back from a VCR with
Digital Link Plus, the VCR picture is shown on
the current channel slot.
If you are playing back from a standard VCR,
DVD player or camcorder, select the AV
socket to which the video signal is connected
in the AV selection list or the channel table.
Video recorders emit a switching voltage
during playback which the TV set can decode
(can be activated for every VCR in the con-
nection wizard). Then the VCR picture is
shown on the current channel slot as in Dig-
ital Link Plus VCR’s.
2. You use the antenna connection between the
VCR and the TV set. The sound is only broad-
cast in mono. To do this, select the first menu
item, e.g. VCR, in the AV selection list.
VIDEO AV1 AV2 AV3 AVS AV Selection
Channel overview: TV Numerical
AVS
AV3
AV2
AV1
0 VIDEO
1 ARD
2 ZDF
3 SAT.1
4 RTL
5 VOX
6 S–RTL
7 N–TV
8 DSF
9 TM3
10 PRO7
11 RTL 2
12 WDR 3
13 BR 3
14 HR
15 MDR 3
M
i
E
Select and
press OK to proceed
Menu
Info
End
Favourite programs
Change programs
Change sorting
O K
0 9 ... Select program: