Loewe 3781 ZW - Manual (Page 15)

15
If, for example, you cannot receive any EPG
providers and no DVB is installed in the TV set,
you should switch off the data acquisition.
Implementing data acquisition
The data must be collected first after these
settings or every time the TV is switched off. To
do this, select the programme which you
have defined as a provider and leave it
switched on for about one hour.
Or switch
the set into standby mode. The green (blue) LED
lights up in addition to the red LED after about
two minutes. Data acquisition takes about one
hour, in sets with a DVB module a little longer.
The data is automatically collected between 2
and 5 in the morning when the TV is switched
off to standby.
Defining personal topics
You will find the programs that interest you
faster when you define your personal topics.
Mark ”Select personal topics” in the EPG menu
and compile your list of personal topics.
Radio mode
You can switch the radio mode on and off with
the
L
button. If at least one satellite tuner
and possibly a DVB module are installed in your
TV set, you will be able to receive radio stations.
If none of these additional modules is installed,
you can only select the audio inputs and play
back through these with the channel table or
the g h buttons. You can find further informa-
tion in the Operating Instructions for satellites
and DVB.
Modes of operation
Select programmes for EPG
Select the channels here for which information is
to be collected.
Channels marked by + are favourite channels. The
provider supplies information for channels
marked by E (terrestrial, cable and analog satel-
lites) and D (digital), these are already marked
(blue letters).
Mark the station/Remove the
marking
red: Only mark favorite stations
green: Mark all stations
yellow: Only mark this station
Back to the EPG menu
Switching data acquisition on/off
Mark ”Data acquisition” in the
EPG menu under ”other”
Select data acquisition off/on
EPG settings
If you want to change the provider or want to
have other programs evaluated, you can do this
in the EPG menu.
Provider search
EPG on/off
Launch EPG menu
Mark ”Provider/Select channel”
Launch
Start provider search (green
button). This may take some
time.
Mark the provider
Save the provider
This is followed by a channel search and a list
of TV channels is displayed which transmit
data. Move on to the provider selection with
the OK- button. If the channels offered are
what you want, move on to the channel selec-
tion with the blue button.
M
OK
OK
M
OK
M
i
E
EPG menu
List of memorized stations
Select provider/program
Favorite programs
Select personal topics
Switch on TV when marked yes
Memorized stations
first report
other ...
Info
Back
End
O K
M
i
E
Select provider
Info
3SAT
PRO7
RTL2
TV 5
TRT 1
Select provider
and confirm
with OK
Back
End
O K
Provider search
Change provider list
Program selection
M
i
E
EPG menu
other ...
Data acquisition
off on
Short info lines none
EPG entry last setting
Info
Back
End
O K
M
i
E
Select personal topics
Info Select topics
and mark with OK
Back
End
O K
Film
News
Show
Hobby
Sport
Child
Knowledge
Music
Culture
General music
Jazz
Rock/Pop
Classical
Folk/Easy listening
Musicals/Opera
Other
mark all
Mark only
Program selection: 3SAT
0 VIDEO
1+ARD
E
2+ZDF E
3+SAT.1 E
4+RTL E
5 VOX
6+S–RTL E
7+N–TV
8 DSF
9+S–RTL E
10+MDR 3
11 DSF
12 TM3
13+PRO7
E
14+RTL 2 E
15+WDR 3 E
16+BR 3 E
17+HR 3 E
18 KIKA
19 PHOENIX E
20 EUROSPRT
21 KABEL 1
22 MTV
23 CNN INT.
24 HOT
25 TV 5
26 VIVA
M
i
E
Back
Info
End
Select programs
and mark
with OK
O K
+ Mark
Mark all
Mark only