Lowrance electronic GlobalMap 5000C - Manual (Page 56)

50
The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the GlobalMap's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the GlobalMap in order to activate the Load or Save com-
mands.
To transfer data
from the GlobalMap to the MMC: press
ENT (for
S
AVE
.)
To transfer data
from the MMC to the GlobalMap: press → to
L OAD
| ENT .
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
↓ to
S
AVE
D
ATA
| ENT . If you wish to rename the file (as
shown in the following figures), press ENT to activate the selection box.
Press
↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press ENT |
↓ to
S AVE D ATA
| ENT .
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press
EXIT .