Lowrance electronic GlobalMap 5000C - Manual (Page 91)

85
want to experiment with Position Pinning, the same instructions are
used to turn the feature on (checked) and off (unchecked.)
1. Press MENU | MENU |
↓ to
GPS S ETUP
| ENT |
↓ to
P OSITION P INNING
| ENT .
2. Press EXIT | EXIT to return to the previous page.
Reset Options
To reset all features to their factory defaults:
Press MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓ to
R ESET O PTIONS
| ENT |
← to
Y
ES
| ENT .
NOTE:
Reset Options does not erase any waypoints, routes, icons, plot trails or
sonar logs.
Reset Options command, left, and the Reset Options Menu, right.
Require DGPS
You can force the GlobalMap to require DGPS for reporting a valid po-
sition. (The default setting, off, uses DGPS automatically when an op-
tional DGPS beacon receiver is connected. However, this auto mode
doesn't
require DGPS reception to yield a position.) Here's how to turn
mandatory DGPS on and off.
1. Press MENU | MENU |
↓ to
GPS S
ETUP
| ENT |
↓ to
R
EQUIRE
DGPS | ENT .
2. To return to the last page displayed, press EXIT | EXIT .
3. You can return to this command and press ENT again to turn the fea-
ture off.