Lathem 7000E - Manual (Page 13)

Card reassign
When the card that you are using becomes full (Max 64 punches), it will show "END" on the
display and the buzzer will sound. When the "END" appears, you can use the "Card
reassign" mode to transfer the card and have a new card take over from the old one.
In this function, it will be usefull........
• when the card has become full before reaching the "Pay Period". [In Payroll Mode]
• when the card that is lost or damaged.
CHANGE
Example
2
Push the CHANGE button for 3
seconds.
When you have a card that you are
using, the number of cards that you
are using will be shown on the
display. If there are no cards used
at the present state, it will show
"n-00" and will end the mode.
003
Card of No.3
017
Card of No.17
transfer
The number
of cards
13
1
Remove the cover. Cover
10