Lathem 7000E - Manual (Page 26)

Job Cost Mode
1
Push the FUNCTION button for 3
seconds and position the " " under
the "MODE" mark.
4
Push the SET button once again.
26
This mode is basically the same as Payroll Mode, but has no pay period. After punching 64
times, the end sign appears.
If you want to reset the card manually without removing the cover, you must select "Reset is
YES".
Example
Card "Reset" is YES.
2
Push the CHANGE button to set the
left-side number at "5" and then push
the SET button. At that moment, the
display will change to the right-side
number. SET
SET FUNCTION CHANGE
FUNCTION CHANGE
MODE
MODE
Job cost
mode
SET FUNCTION CHANGE
MODE
Set the "Mode".
3
In this case, push the CHANGE
button to set at "2" and then push
the SET button.
Card "Reset"
No
Yes
1
2
Set the card "Reset".
Card "Reset"
is YES
23