La Crosse Technology WS-9711U-IT User Manual

Page 5

Advertising
background image

17

Section 3 - WEATHER ICON (WEATHER GIRL)

The weather is represented in the form of 15 weather symbols (Weather Girl), which
changes appearance depending on the air pressure development and the current
outdoor temperature.

The weather girl icon representations can be seen in the section "

WEATHER

FORECAST AND TENDENCY

".

Section 4 - INDOOR TEMPERATURE AND HUMIDITY

Current indoor temperature and humidity.

By pressing the MIN/ MAX key, display of the stored MIN/MAX indoor temperature
and humidity, with simultaneous display of MIN/ MAX symbol in Section 5.

Section 5 - OUTDOOR TEMPERATURE

Displays the current outdoor temperature.

By pressing the MIN/ MAX key, display of the stored MIN/MAX outdoor temperature
with simultaneous display of a MIN or MAX symbol.

By pressing the CH/ + key, display of outdoor sensors (up to three outdoor
transmitters). The number 1, 2 or 3 will be shown.

A signal reception symbol will be shown indicating that receiver is receiving outdoor
temperature.



18

MANUAL SETTINGS:

To enter the manual setting mode, press and hold the SET key for approximately 3 seconds
until the first setting option appears and flashes (LCD contrast setting). From here, each time
the SET key is pressed the next available setting option will be selected and will flash to
indicate the current option. Once a setting has been made according to the specific
instructions that follow, press the SET button once to move the next desired setting or
repeatedly until the display returns to normal operating mode.

Note: If no buttons are pressed within approximately 15 seconds while in any setting option,
the unit will return to normal operating mode.

LCD contrast setting

Time zone setting

Daylight saving time (DST) ON/OFF setting

Time reception ON/OFF setting

12/24-Hour setting

Manual time setting

Manual calendar setting

Sunrise/ Sunset city location

Snooze setting

°F/ °C setting

Weather forecasting icon sensitivity setting

19

LCD CONTRAST SETTING




The LCD contrast can be set to 8 different levels (0 to 7) to suit the user’s needs (default
LCD contrast setting is LCD 5). To set the desired contrast level:
1.

Press and hold the SET key until the above display is seen. Press the CH/ + key to
select the level of contrast desired.

2.

Press the SET key to confirm and enter the “Time Zone setting” or exit the setting
mode by pressing the SNOOZE/ SUN key.


TIME ZONE SETTING:







Flashing

Flashing

20

The time zone default of the Weather Station is -5. To change to another time zone:
1.

Press the SET key after completing the LCD contrast setting in order to enter the time
zone setting (flashing).

2.

Using the CH/ + key, set the time zone. The range runs from 12 to -12 in consecutive
1hour intervals. The U.S. time zones are (negative numbers) -5h (EST), -6h (CST), -
7h (MST) and –8h (PST) zones.

3.

Press the SET key to confirm and enter the “Daylight Saving Time” (DST) or exit the
setting mode by pressing the SNOOZE/ SUN key

DAYLIGHT SAVING TIME (DST) ON/OFF SETTING

Note: The DST default is “ON”, meaning that the
received time will automatically be adjusted according to
Daylight Saving Time in the spring and fall. For areas
that do not recognize DST changes turn the DST
‘’OFF’’.




Flashing

Flashing

Advertising