La Crosse Technology WS-9711U-IT User Manual
Page 8
29
New Mexico
ABQ – Albuquerque
Indiana
EVV – Evansville
IND – Indianapolis
West Virginia
CRW – Charleston
Nevada
LAS – Las Vegas
RNO – Reno
Kansas
DDC – Dodge City
K32 – Wichita
TOP – Topeka
New York
BUF – Buffalo
JFK – New York City
SYR – Syracuse
Wisconsin
GBR – Green Bay
LSE – La Crosse
Ohio
CLE – Cleveland
CMH – Columbus
Wyoming
CPR – Casper
The Canadian cities are displayed as follows:
Code – City
Code – City
Code – City
ALB – Calgary
QUE – Quebec
Van – Vancouver
OTT – Ottawa
TOR – Toronto
WIN – Winnipeg
30
SNOOZE SETTING:
The snooze time can be set OFF or to a maximum time of 30 minutes (default is 10
minutes):
1.
The snooze time (in minutes) digit will be flashing. Use the CH/ + key to set the
snooze time (in minutes). Each pressing of the key will increase the snooze time by 5
minutes. The snooze can also be set OFF when the “OFF” digit is being displayed.
2.
Confirm with the SET key and enter the “ºF/ºC temperature unit setting” or exit the
manual setting mode by pressing the SNOOZE/ SUN key.
Note:
If the snooze time has been set “OFF”, the snooze function will not be activated.
Flashing
31
pm
°F/°C TEMPERATURE UNIT SETTING
The default temperature reading is set to °F (degree Fahrenheit). To select °C (degree
Celsius):
1.
The “°F” will be flashing, use the CH/ + key to toggle between “°F” and “°C”.
2.
Once the desired temperature unit has been chosen, confirm with the SET key and
enter the “Weather Forecast Icon Sensitivity setting” or exit the setting mode by
pressing the SNOOZE/ SUN key.
WEATHER FORECASTING ICON SENSITIVITY SETTING
For locations with rapid changes of weather conditions, the threshold can be set to a
different level for faster display of changing weather conditions.
Flashing
32
1.
The current sensitivity value will start flashing.
2.
Using the CH/ + key to set the weather sensitivity level. There are 3 levels of setting:
1, 2 and 3; level 1 is the most sensitive setting, level 3 is the least sensitive setting
(default setting is "2").
3.
Confirm with the SET key and exit the Manual settings.
Flashing
Flashing