Loewe Viewvision DR+DVB-T - Manual (Page 26)

- 6
Change station
You can set an analogue station manually.
➠ Not with Digital Link Plus (DLP).
Open the Station list menu (page 5).
5
6 Select PR number.
Confirm.
5
6 Select Program Edit.
Confirm with OK.
The Program Edit menu is displayed.
25 S 23 PAL 0 ON OFF OK
PR Seek Ch. MFT DECODER NICAM PAL/SECAM
3 4 Move the cursor to the previous / next column.
5 6 Edit the setting at the current cursor position.
Explanations of the settings
PR Indicates the selected station number (display only).
Seek Searches for stations automatically.
3 4 Select Seek and then
5 6 start search. The search is stopped when the recorder
receives a station.
Ch. Changes the channel number.
3 4 Select Channel and then
5 6 set.
MFT Changes the frequency for manual fine tuning.
3 4 Select MFT and then
5 6 set.
DECODER When option ON coded stations are received by a connected
decoder.
NICAM Switch NICAM reception on/off. Select option OFF in case of
sound interference.
PAL/SECAM changes the reception standard for Viewvision DR+ DVB-T
Secam.
3 4 Select PAL/SECAM in case of distorted negative
picture.
5 6 Select SECAM for the SECAM-L standard.
OK Save settings.
Moving stations
You can sort the order of analogue stations in the Station List menu.
➠ Not with Digital Link Plus (DLP).
➠ Not valid when receiving digital TV channels which have a permanent pro-
gramme assignment number (LCN).
5 6 Select station in the Station List menu.
Confirm with OK.
The available options are displayed at the bottom left.
5 6 Select Move.
Confirm with OK.
5 6 Select desired PR slot.
OK Save settings.
Delete Station
You can delete a station in the Station List menu.
➠ Not with Digital Link Plus (DLP).
5 6Select station in the Station List menu.
Confirm with OK.
The available options are displayed at the bottom left.
5 6 Select Delete.
OK The station is deleted.
Initial Installation