Loewe Viewvision DR+DVB-T - Manual (Page 27)

7 -
Clock set
When the automatic station search has finished, the date and time are set auto-
matically (depending on the transmitting station), also when power is recovered.
The Auto option must be set for this.
OK
Auto Programming
Program Edit
Clock Set
TV Aspect
AV2 Connection
Video output format
Power Save Mode
Antenna Feed 5V
Initialization
Auto
Manual
 Prev. Select Move
0 Time Offset
Call menu.
5
6 Select General symbol.
4 Call second level.
5 6 Select Clock set.
4 Call third level.
5 6 Select Auto.
4 Select Time Offset.
5 6 Set time offset of 0, 0, 60, 90 or 10 minutes in case
the automatic set time differs from the local time.
Confirm with OK.
Exit menu.
➠ Please check by pressing in TV mode whether the year and date have
been automatically set correctly. You may have to set it manually as described
under “Manual setting of date / time”.
Manual Setting of the Date / Time
It is possible that the television station may broadcast incorrect date and / or time
information or no information at all and that the Recorder sets the incorrect time.
If this is the case we recommend that you set the clock manually.
Call menu.
5
6 Select General symbol.
4 Call second level.
5 6 Select Clock set.
4 Call third level.
5 6 Select Manual.
Confirm with OK.
OK
Auto Programming
Program Edit
Clock Set
TV Aspect
AV2 Connection
Video output format
Power Save Mode
Antenna Feed 5V
Initialization
Auto
Manual

 Prev.  Next Select Move
2008 Year
6 12 Date
10 57 :
/
Time
Enter the date and time.
3 4 Move cursor.
5 6 Enter data.
Confirm with OK.
Exit menu.
TV Aspect
You can choose:
4:3 Letter Box Recordings in wide-screen format appear with a black bar at
the top and bottom edges of the screen.
4:3 Pan Scan The picture fills the whole screen but cuts off sections at both
sides if necessary.
16:9 Wide Select this setting if a wide-screen TV set with 16:9 picture
format is connected.
➠ If the resolution is set to 70p or 1080i, this option is not available.
AV2 Connection
You can connect the following devices to the AV2 DECODER connection on the
back of the recorder:
Decoder Connect a Pay-TV or Canal+ decoder.
Others Connect a video recorder or similar device.
OK
Auto Programming
Program Edit
Clock Set
TV Aspect
AV2 Connection
Video output format
Power Save Mode
Antenna Feed 5V
Initialization
Decoder
Others
 Prev. Select Move
Initial Installation