Loewe Viewvision DR+DVB-T - Manual (Page 29)

9 -
Audio Menu
Each DVD disc offers a variety of audio formats. Set the audio format for the
recorder according to the type of audio system you are using.
Dolby Digital / DTS / MPEG
PCM Select this option if the unit is connected to a digital two
channel stereo amplifier. The DVD recorder‘s digital audio
outputs emit sound in PCM  channel format if you play a
DVD-Video disc with Dolby Digital audio format.
Bitstream Select Bitstream if you have a Dolby Digital decoder (or
amplifier, a Loewe TV with AC or DIS module or another unit
with Dolby Digital decoder) connected to the DIGITAL OUT
socket of the DVD recorder.
OFF If you select OFF the DTS signal is not emitted from the
DIGITAL OUT socket.
Sampling Frequency
If your receiver or amplifier is NOT designed for 96 kHz signals, select 48 kHz. If
you have made this selection, the unit automatically converts the 96 kHz signals to
48 kHz signals that the system can decode. If your receiver or amplifier is designed
for 96 kHz signals, select 96 kHz.
Night Mode (DRC)
Thanks to digital audio technology the DVD format enables you to hear soundtracks
in the most accurate and realistic way possible. However, you may wish to limit
the dynamics (i.e. the difference between the loudest and the quietest sounds). In
this way you can play a film with minimum volume differences. For this purpose
switch DRC to ON.
OK
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
OFF
ON
 Prev. Select Move
Karaoke Audio (Vocal)
Switch the singing option (Vocal) on, if you want to play a multi-channel karaoke
DVD. The karaoke channels on the disc are mixed into normal stereo sound.
Lock Menu
Set Password
Lock System
DVD Rating
DTV Rating
Set Password
Area Code
DivX Reg. Code
Change
Delete
 Prev. 0-9 Input
New Password
OK
Call menu.
5 6 Select symbol Lock.
4 Call second level.
5 6 Select Set Password.
4 Call third level.
If you have not yet entered a password
Enter a four-digit number with number buttons.
Confirm with OK.
Enter password to check.
Confirm with OK.
If you have already entered a password
Select Change.
Confirm with OK.
Enter current password.
Confirm with OK.
Then enter a new four-digit password.
Confirm with OK.
Enter password to check.
Confirm with OK.
➠ If you make a mistake, press 3repeatedly before you press OK to delete or
correct the password numbers one after another.
Initial Installation