La Crosse Technology WS-7213U - Manual (Page 43)

9
6. In sequential order, install batteries
(follow the same battery installation
procedures seen in section I. A) of the
Detailed Set-Up Guide).
7. Install batteries into the Indoor
Temperature Station.
8. Follow the Detailed Set-Up Guide for
programming and operating
instructions.
D. VIEWING AND OPERATING
WITH MULTIPLE REMOTE
CONTROL SENDER UNITS
1. To view the temperature of a different
Remote Control Sender unit, press the
CH button. A shift from one “boxed”
number to the next should be observed
in the OUTDOOR LCD.
2. To view the Minimum/Maximum
temperature: first select which Remote
Control Sender to read data from
(indicated by the “boxed” number).
Pressing the MIN/MAX button will
toggle through the minimum and