Linksys SRW208 - Manual (Page 13)

2 Chapter 1: Introduction
Welcome
WebView Switches
There are features that allow you to expand and grow your network of switches. Link aggregation allows multiple
high-bandwidth trunks between switches to be setup. This also provides a level of reliability in that the system
continues to operate if one of the links break. Spanning Tree (STP), Fast Spanning Tree, and Rapid Spanning Tree
(RSTP) allow you to build a mesh of switches increasing the availability of the system.
The rich management functionality of the WebView switches includes SNMP, RMON, Telnet, and HTTP
Management options, allowing you to flexibly integrate and manage these devices in your network.
The SRW208P and SRW208MP support Automatic Load Sensing - Power control circuitry automatically detects
Power over Ethernet on access point before providing power. Power feeding of Ethernet limited for fixed 10/100
Base-T/TX ports. The SRW208MP can provide maximum output power per PoE port up to 15.4W on 8 ports
simultaneously. while the SRW208P can provide maximum output power on 4 ports simultaneously or 8 ports at
half power.