Linksys SRW208 - Manual (Page 61)

50 Chapter 5: Using the Web-based Utility for Configuration
Statistics Tab - 802.1x Statistics
WebView Switches
Statistics Tab - 802.1x Statistics
The 802.1X Statistic screen contains information about EAP packets received on a specific port.
Port. Indicates the port, which is polled for statistics.
Refresh Rate. Indicates the amount of time that passes before the EAP statistics are refreshed. The possible field
values are:
• No Refresh. Indicates that the EAP statistics are not refreshed.
• 15 Sec. Indicates that the EAP statistics are refreshed every 15 seconds.
• 30 Sec. Indicates that the EAP statistics are refreshed every 30 seconds.
• 60 Sec. Indicates that the EAP statistics are refreshed every 60 seconds.
Name. Displays the measured 802.1x statistic.
Description. Describes the measured 802.1x statistic.
Packet. Displays the amount of packets measured for the particular 802.1x statistic.
Statistics Tab - GVRP Statistics
The GVRP Statistics screen contains device statistics for GVRP.
The GVRP Statistics screen is divided into two areas, GVRP Statistics Table and GVRP Error Statistics Table. The
following fields are relevant for both tables:
Interface. Specifies the interface type for which the statistics are displayed.
• Port. Indicates port statistics are displayed.
• LAG. Indicates LAG statistics are displayed.
Refresh Rate. Indicates the amount of time that passes before the GVRP statistics are refreshed. The possible
field values are:
• No Refresh. Indicates that the GVRP statistics are not refreshed.
• 15 Sec. Indicates that the GVRP statistics are refreshed every 15 seconds.
Figure 5-24: Statistics - 802.1x Statistics
Figure 5-25: Statistics - GVRP Statistics