Linksys SRW208 User Manual
Page 55
44
Chapter 5: Using the Web-based Utility for Configuration
Statistics Tab - RMON Statistics
WebView Switches
Refresh Rate. Defines the amount of time that passes before the interface statistics are refreshed. The possible
field values are:
•
No Refresh. Indicates that the RMON statistics are not refreshed.
•
15 Sec. Indicates that the RMON statistics are refreshed every 15 seconds.
•
30 Sec. Indicates that the RMON statistics are refreshed every 30 seconds.
•
60 Sec. Indicates that the RMON statistics are refreshed every 60 seconds.
Drop Events. Displays the number of dropped events that have occurred on the interface since the device was
last refreshed.
Received Bytes (Octets). Displays the number of octets received on the interface since the device was last
refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
Received Packets. Displays the number of packets received on the interface, including bad packets, Multicast
and broadcast packets, since the device was last refreshed.
Broadcast Packets Received. Displays the number of good broadcast packets received on the interface since
the device was last refreshed. This number does not include Multicast packets.
Multicast Packets Received. Displays the number of good Multicast packets received on the interface since the
device was last refreshed.
CRC & Align Errors. Displays the number of CRC and Align errors that have occurred on the interface since the
device was last refreshed.
Undersize Packets. Displays the number of undersized packets (less than 64 octets) received on the interface
since the device was last refreshed.
Oversize Packets. Displays the number of oversized packets (over 1518 octets) received on the interface since
the device was last refreshed.
Fragments. Displays the number of fragments (packets with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the device was last refreshed.
Jabbers. Displays the total number of received packets that were longer than 1518 octets. This number excludes
frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field range to detect
jabbers is between 20 ms and 150 ms.
Figure 5-17: Statistics - RMON Statistics