Lexmark Z32 - Manual (Page 28)

•
•
•
•
•
Chapter 4 24
• Error messages (such as Printer Offline) and job progress
information do not display on your computer screen.
Before proceeding, verify that:
• The printer software has been installed correctly. See page 31.
• The parallel or USB cable is securely attached to both the
printer and the computer.
• The printer is plugged in and turned On.
If you have a switch box or other device (such as a scanner or fax)
connected to the computer’s parallel port, make sure it supports
bidirectional communication.
You may need to disconnect your printer from a switch box or
other device and connect it directly to your computer.
The Lexmark Z22 ships with a High Resolution Color cartridge
only. You can instantly improve print speed and print quality by
simply adding an optional Waterproof Black Cartridge (P/N
17G0050).
If you are using a USB hub, remove the hub and connect the USB
cable directly to the computer.
Printer ejects a blank page after appearing to print
Make sure:
• You have removed the sticker and transparent tape from the
bottom of the print cartridges. For help, see page 17.
• Your Lexmark printer is set as the default printer.
Printer prints very slowly
• Close any open applications not in use.
• Decrease the print quality setting.
• For Windows, consider purchasing more memory.
• For Macintosh, consider purchasing more memory, or
increasing the virtual memory for your computer.
Warning: Do
not touch the
gold contact
area of the
print cartridge.