Liebherr HC 20 - Manual (Page 18)

Mounting the ventilation grille
-
Figure 32, 33
1. Pull out the bottom freezer drawer.
2. Remove the blue protection film from the dust
filter provided and insert the filter into its opening
in the toe kick area as shown in
Figure 32.
Figure 31
11. Extend the soft-stop cylinder and connect with
the ball stud (Figure 30).
12. Attach the retaining clamp to the ball housing of
the soft-stop cylinder (Figure 31).
To avoid injury or damage, do not forget
to secure the soft-stop device with the
retaining clamp.
3. Mount the ventilation grille as shown in Figure 33.
IMPORTANT
Only use the ventilation grille provided with
the appliance. This grille is required for proper
operation of the appliance.
The ventilation opening must not be covered
with a cabinet base.
Failure to use the supplied grille can result in
product failure and will void the warranty.
Figure 32
Figure 33
Figure 30
18
I
NSTALLATION