Liebherr HC 20 - Manual (Page 4)

Unit Dimensions
- Figure 1
Unit Venting
- Figure 3
HC 20 appliances do not require any ventilation
openings in the cabinet. The required airflow is
directed through the toe kick area.
It is important to use the provided cover grille for
the ventilation opening. This opening must not be
covered with a cabinet base.
Figure 3
Door swing clearence
- Figure 2
Please allow for door swing clearance at locations
next to a wall.
The illustrated measurement is without mounted
front panels. Be sure to add your panel thickness
and handle depth to this measurement in order to
avoid interferences.
A = 3" (76 mm)
B = 79-13/16" (2027 mm)
C = 35-13/16" (910 mm)
D = 3" (76 mm)
E = 24" (610 mm)
G = 42-7/16" (1078 mm)
H = 37-1/8" (943 mm)
Figure 2
Figure 1
4
P
LANNING
I
NFORMATION