Life Fitness Lat Pulldown/Low Row 8210 - Manual (Page 11)

• Route threaded end of the 122-3/4” LAT CABLE (12) around pulleys in TOP BOOM (2) and PULLEY
BLOCK ASSEMBLY. Route 122-3/4” LAT CABLE (12) down through hole in TOWER BRACE (7)
as shown in FIGURE 13.
STEP 13:
FIGURE 13
• SECURELY assemble one 4-1/2” PULLEY (13) between the plates of the TOP BOOM (2) using one
3/8 X 2-1/4” BOLT (21) and one 3/8” LOCK NUT (27) as shown in FIGURE 14. (NOTE: Make
sure the cable runs in the groove of the PULLEY.)
STEP 14 :
FIGURE 14
11
PULLEY
BLOCK
ASSEMBLY
12
3/8 X 2-1/4” 21
13
12
27
2
2
7