Life Fitness Lat Pulldown/Low Row 8210 - Manual (Page 13)

13
• Route the threaded end of the 112-3/4” LOW ROW CABLE (11) through the UPRIGHT (4) as shown,
then SECURELY assemble one 4-1/2” PULLEY (13) to the UPRIGHT (4) and over the top of the
cable using two 3/8 X 2-3/4” BOLTS (22), two 3/8” FLANGE SPACERS (28), two 3/8” WASHERS
(25), and two 3/8” LOCKNUTS (27). (NOTE: The LOW ROW CABLE (11) should be routed over
the retaining bolt as shown in FIGURE 16.)
STEP 16:
3/8 X 2-3/4” 22
11
4
28
• Route threaded end of the 112-3/4” LOW ROW CABLE (11) around the bottom pulley of the PULLEY
BLOCK ASSEMBLY as shown in FIGURE 16.
PULLEY
BLOCK
ASSEMBLY
25
13
27
FIGURE 16