Lexmark 2480 - Manual (Page 130)

126
Tr
oubleshooting
7 To set NLQ, select the best alignment bars from
the 01 - 07 printout.
The current value is the number printed below
the bars.
Press Micro
↑
or Micro
↓
to select the best
alignment by number or keep the current
value.
After making your selection, the printer
prints a single row showing the current
alignment setting.
8 Press Set TOF to save your selections.
9 Close the Operator panel cover.
The printer returns to Ready.
Clearing paper jams
The following steps explain how to clear paper jams.
Cut form jams
1 Turn the printer Off.
2 Set the forms thickness lever to position 7.
3 Push the paper select lever down to the
continuous forms
position.
4 Gently pull out the sheet of paper from the
front of the printer.
5 Remove the ribbon access cover to clear any
torn pieces of paper.
6 Set the paper select lever to the cut forms
position.