Lexmark 2480 - Manual (Page 36)

32
Operator panel
Selecting or locking a pitch
1 To select a pitch, open the operator panel to
layer 2.
2 Repeatedly press Pitch until you see the pitch
light On next to the selection you want.
3 To lock a pitch so your software application
cannot select a different one, continue pressing
Pitch until the Pitch Lock light comes On and
the pitch you want is selected.
The pitch is locked until the printer is turned
Off.
4 To disable Pitch Lock, repeatedly press Pitch
until the Pitch Lock light turns Off and the pitch
you want is selected.
5 Close the operator panel.
If the printer is offline, press Start/Stop. The
Ready light comes On and you are ready to
print.
6 To set a Pitch or Pitch Lock as a default setting
in the Setup menu, see “Using Setup mode to
change printer settings” on pag e89.
Power
Set TOF LineFeed Macro
Micro
↑
Micro
↓
Setup
Pitch
Lock
10
12
15
17
20
PS
1 2 3 4
Macro
Layer 2