Lantronix UBox UBX4100 - Manual (Page 12)

Installing the UBox
2. Once the UBox has power, notice the following:
‹ The UBox's status lights turn on and off. After a few seconds, the lights stop
blinking.
‹ If the UBox is responding properly, the four green USB lights turn on and
stay solid.
‹ The first green SYSTEM light blinks on and off every few seconds. Ignore
any other status lights for now.
Figure 3-4. SYSTEM LEDs
SYSTEM
USB
Note: The LEDs on the UBox can also indicate other statuses, such as IP
configuration type and UBox status. For a detailed description of what the
LED lights indicate, see
A: Status Light Behavior .
Troubleshooting
‹ You may see red lights on the UBox at this point in the installation. This is
normal until you install the UBox software on at least one computer.
‹ If you do not see the USB lights turn on or do not have a blinking green
SYSTEM light, please proceed to
Troubleshooting: Status Lights on page 49.
The UBox hardware installation is now complete. Please proceed to the UBox
software installation instructions.
UBox User Guide 12