Choke, Troubleshooting & repair, Choke test procedure (continued) – Lincoln Electric IDEALARC CV-305 User Manual
Page 54
Advertising
CHOKE
FIGURE F.8 - CHOKE
CHOKE TEST PROCEDURE
(CONTINUED)
PROCEDURE
1. Using a digital ohmmeter, make sure that the
choke windings are not grounded to the lamina-
tion (> 1megohm).
No windings or terminal connections should look
burned or over-heated. Welding may cause choke
to buzz slightly.
TROUBLESHOOTING & REPAIR
F-22
F-22
IDEALARC® CV-305
Advertising