Life Fitness LFADJ - Manual (Page 11)

11
STEP 6:
‰ Insert two 1/2” x 1/2” BUSHINGS (20) into the bottom ends of the SEAT ADJUSTMENT ASSEMBLY (12). Insert the
1/2” x 3 1/4” SHAFT (21) through the 1/2” x 1/2”BUSHINGS (20).
‰ Insert two 1/2” x 1/2” BUSHINGS (20) into the bottom ends of the SEAT PIVOT BAR (11). Insert the 1/2” x 3 1/4”
SHAFT (21) through the 1/2” x 1/2” BUSHINGS (20).
‰ Attach the SEAT ADJUSTMENT ASSEMBLY (12) and the SEAT PIVOT BAR (11) to the ROLLER CARRIAGE
ASSEMBLY (D) using four M10 X 20mm SCREWS (22) and four FLAT 3/8” WASHERS (19). Tighten the screws
securely.