Life Fitness LFADJ - Manual (Page 12)

12
STEP 7:
‰ Insert two 3/4” x 1” BUSHINGS (36) to the ends of the PAD HOLDER ASSEMBLY (4). Insert the 1/2” x 3 1/4” SHAFT
(35) through the 3/4” x 1” BUSHINGS (36).
‰ Position the PAD HOLDER ASSEMBLY (4) onto the MAIN FRAME ASSEMBLY (1) as shown.
‰ Secure the PAD HOLDER ASSEMBLY (4) to the ROLLER CARRIAGE ASSEMBLY (D) using two M10 x 20mm
SCREWS (22) and two FLAT 3/8” WASHERS (19). Tighten the screws securely.