Life Fitness Leg Extension - Manual (Page 4)

Leg Extension
Assembly Instructions
1. LOOSELY assemble the FRONT BRACE (1) and REAR BRACE (2) to the
TOWER (3) using four M10 X 130mm BOLTS (4), eight 3/8" SAE WASH-
ERS (5) and four M10 NYLOCK NUTS (6) as shown.
2 Assemble the MAIN PIVOT FRAME (7) to the TOWER (3) using one HUB
PLATE (8) (as shown), two M10 X 75mm BOLTS (9), four 3/8" SAE
WASHERS (5) and two M10 NYLOCK NUTS (6) at the top of the MAIN
PIVOT FRAME. Use one M10 X 70mm BOLT (10), two 3/8" SAE WASH-
ERS (5) and one M10 NYLOCK NUTS (6) at the bottom of the MAIN
PIVOT FRAME. Tighten the BOLTS and NUTS securely.
3. LOOSELY assemble the SEAT FRAME (11) to the FRONT BRACE (1) and
REAR BRACE (2) using four M10 X 90mm BOLTS (12), eight 3/8" SAE
WASHERS (5) and four M10 NYLOCK NUTS (6) as shown.
4. LOOSELY assemble the TOP BRACE (13) to the SEAT FRAME (11) and
TOWER (3) using two M10 X 35mm BOLTS (14), four 3/8" SAE WASH-
ERS (5) and two M10 NYLOCK NUTS (6) at the SEAT FRAME and two
M10 X 70mm BOLTS (10), four 3/8" SAE WASHERS (5) and two M10
NYLOCK NUTS (6) at the TOWER as shown.
5. Tighten all BOLTS and NUTS securely.
6. Assemble the LEFT HANDLE (15) to the SEAT FRAME (11)
using two M10 X 35mm BOLTS (14), four 3/8" SAE WASH-
ERS (5) and two M10 NYLOCK NUTS (6). Tighten the
BOLTS and NUTS securely.
Repeat for the RIGHT HANDLE (16).