Lanier 5705 - Manual (Page 255)

How Connect Copy Works
241
4
How Connect Copy Works
In this manual we refer to the two machines as the master unit and sub-unit re-
spectively.
1. Master unit
2. Sub-unit
❖ Copy
As your original is scanned, the image data is stored on the master unit hard
disk and transferred simultaneously to the sub-unit hard disk. As soon as
scanning has finished, copying starts.
❖ Copy Server
The master unit transfers the image data stored in the hard disk to the sub-
unit hard disk.
As soon as transferal has completed, copying starts.
Note
❒ Transfer of image data may take some time.
The master unit is the machine at which you press the
[Connect] key to enter
Connect Copy mode. When you do this, the other machine becomes the sub-
unit. You can use either machine as the master unit or sub-unit, but you can-
not change the relationship without exiting Connect Copy mode first.
Connectable Copier Models
• You can still use Connect Copy even if no optional large capacity tray (LCT)
is available. However, the optional finisher must be installed in both units in
order to use Staple functions, and the punch kit must be installed in both units
in order to use the Punch function.