Exiting connect copy mode – Lanier 5705 User Manual
Page 265
Using Connect Copy
251
4
-Auto Off
The machine turns itself off automatically a certain period of time after your job
has finished. This function is called “Auto Off”.
Note
❒ The Auto Off function is available only for the main unit.
Reference
See “Auto Off Timer” in the System Settings manual.
Exiting Connect Copy Mode
A
Press the
[Connect]
key on the master unit.
The
[Connect]
key will be deselected.
Note
❒ Settings which were selected on the master unit while in Connect Copy
mode will not be cleared.
❒ Press the {
Clear Modes
} key to cancel the master unit settings and return to
the initial state.
❒ The sub-unit will return to the state which is before entering Connect Copy
mode.
Reference
If you cannot exit Connect Copy mode, see
⇒
P.269 “If You Cannot Exit
Connect Copy”