Lanier 5705 - Manual (Page 284)

What to do if Something Goes Wrong
270
5
Nothing happens when
you press the
[Connect] key.
The master unit or sub-unit
needs a fresh supply of ton-
er or staples. Solve the problem in the
appropriate unit.
Reference
See
⇒
P.277 “ B Loading
Paper”
See
⇒
P.283 “ D Chang-
ing the Toner Bottle”
See
⇒
P.299 “ d Adding
Staples”
See
⇒
P.305 “ y Remov-
ing Punch Waste”
For any other problems,
follow the instructions
that are displayed.
To exit Connect Copy
mode, press the master
unit {
Stop } key. then
press the [Cancel] key.
A paper misfeed occurred
during stapling. Remove the misfed paper.
To exit Connect Copy
mode, press the {
Stop }
key, then press the [Con-
nect] key.
Machine Status Cause Action